Author Index

A

  • Abdolkhani, Ali Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
  • Abdolkhani, Ali Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
  • Abdolkhani, Ali Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
  • Abdolkhani, Ali Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
  • Abyaz, Ali The effect of submicron cellulose binder on the properties of briquettes made from bagasse and rapeseed [Volume 14, Issue 3, 2023, Pages 243-251]
  • Adeli, Kamran Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
  • Afra, Elyas Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
  • Afra, Elyas Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2024, Pages 415-431]
  • Ahmadi, Mohammad Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
  • Aryaie Monfared, Mohammad Hadi The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2024, Pages 433-444]
  • Ataeefard, Maryam Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
  • Azadfallah, Mohammad The effect of submicron cellulose binder on the properties of briquettes made from bagasse and rapeseed [Volume 14, Issue 3, 2023, Pages 243-251]
  • Azadfallah, Mohammad Investigating the effect of pH changes and molar ratio on the properties of melamine formaldehyde resin for impregnating decoration paper [Volume 14, Issue 4, 2024, Pages 363-376]

B

  • Bahmani, Mohsen Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
  • Bahmani, Zahra Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
  • Bayatkashkoli, Aَli Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
  • Bazvand, Maryam Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]

D

  • Dahmardeh Ghalehno, mohammad Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2024, Pages 389-402]
  • Dahmardeh Ghalehno, Mohammad Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
  • Dalvand, Mosayeb Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2024, Pages 329-338]

E

  • Ebrahimi, SeyedehSedigheh Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
  • Ebrahimpour Kasmani, Jafar The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
  • Emadi Jafarpour, Hossein Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]

F

  • Faal, Azarang Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
  • Farrokhpayam, Saeed reza Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
  • Fotovat, Farzam Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]

G

  • Ghafarzadeh, Omid Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
  • Ghasemian, Ali Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
  • Ghasemian, Ali Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2024, Pages 415-431]
  • Ghofrani, Mohammad Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
  • Gholami, Davood Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
  • Gholamiyan, Hadi Analysis of effective indicators and solutions on the competitiveness of Iran's multi-purpose furniture market [Volume 14, Issue 2, 2023, Pages 127-138]
  • Gholamiyan, Hadi The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
  • Gholampoor, Behnam Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
  • Godskhah Daryaei, Mehrdad Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
  • Gohari asl, sayed saleh Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]

H

  • Hamzeh, Yahya Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
  • Hamzeh, Yahya Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
  • Hamzeh, Yahya Investigating the effect of pH changes and molar ratio on the properties of melamine formaldehyde resin for impregnating decoration paper [Volume 14, Issue 4, 2024, Pages 363-376]
  • Hedjazi, Sahab Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
  • Hedjazi, Sahab Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
  • Hedjazi, Sahab The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2024, Pages 433-444]
  • Heidari Emamverdikhan, Heidar The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2024, Pages 433-444]
  • Hosseini-Tabatabaei, Mahmoud-Reza Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
  • Hosseini-Tabatabaei, Mahmoud-Reza The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
  • Humar, Miha Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]

I

  • Izadi Firoozabad, mohsen Investigation of Soluble copper nanoparticles effects in Construction Five-layer boards [Volume 14, Issue 4, 2024, Pages 351-362]
  • Izadyar, Soheila Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]

J

  • Jafari, Bahareh Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
  • Jonoobi, Mehdi Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]

K

  • Keyvan Behjo, farshad Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
  • Khademi Eslam, Habib Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
  • Khakifirooz, Alireza Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
  • Kord, Behzad Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]

M

  • Mashayekhi, Davood Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
  • Mirazadi, Zahra Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
  • Moezzipour, Aida Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
  • Mohammadi, Nasibeh Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
  • Mohseni, Reza Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
  • Moradi, Zahra Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
  • Movahedi, Farnaz Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]

N

  • Nikoutadbir, Alireza Determining the price index of three products of fiberboard and paticleboard (wood-bagasse) between 2010-2019 [Volume 14, Issue 3, 2023, Pages 299-311]
  • Norouzzadeh, Mohamadreza Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
  • Nosrati, Babak Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]

O

  • Oladi, Reza Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
  • Oladi, Reza Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]

P

  • Podineh Zaboli, Mohammad Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
  • Pourtahmasi, kambiz Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
  • Pourtahmasi, Kambiz Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]

R

  • Rafiee, Hamed Analysis of effective indicators and solutions on the competitiveness of Iran's multi-purpose furniture market [Volume 14, Issue 2, 2023, Pages 127-138]
  • Rahmanifard, Roohollah Choosing a technology acquisition method in the paper industry with a fuzzy decision-making approach [Volume 14, Issue 2, 2023, Pages 199-214]
  • Rangavar, Hossein Investigation of Soluble copper nanoparticles effects in Construction Five-layer boards [Volume 14, Issue 4, 2024, Pages 351-362]
  • Rashidi, Alimorad Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
  • Roohani, Mehdi Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
  • Roohani, Mehdi Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]

S

  • Samariha, Ahmad The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
  • Samariha, Ahmad Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
  • Shamsian, Mohammad physical and mechanical properties of wood-plastic based on MDF sawdust with the addition of sawdust coal, sulfur and recycled rubber powder [Volume 14, Issue 4, 2024, Pages 339-349]
  • Shamsian, Mohammad Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2024, Pages 389-402]
  • Sharifat, Marzieh Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]
  • Sharifi, Seyed Hassan Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]

T

  • Taherzadeh, Mohammad Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
  • Tarmian, Asghar Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]

Z

  • Zarea Hosseinabadi, Hamid Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]